Fachverlag x-technik
search
  • thumbnail

    content type : HAAS

    Auto Door for Mills - Haas Automation Option Spotlight

    Check out this quick introduction to the Auto Door option available on Haas VMCs. The Auto Door reduces operator fatigue and prepares your mill for automation. And now the Auto Door comes standard on our Super Speed and...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas' Visual Programming System for Lathes. How It Works. Haas Automation, Inc.

    Our Visual Programming System (or VPS for short) for lathes gives you an easy way to write programs on the fly at your machine's control, using the geometry and features of your part. This video gives you a quick tour...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    ST-55 Cutting Demo "Extended Edit" - Haas Automation, Inc.

    You might remember this cutting demo we did on our ST-55 a few years back. We found an extended mix of the demo lying in the crates and we thought we’d publish it, just in case anyone was wishing they had some large...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Rebuilding a Chuck with LMC's Jay Duerr - Haas Automation, Inc.

    Recently Jay Duerr, President and CEO of LMC Workholding, stopped by the Haas Factory to get his hands dirty and talk about the chuck rebuild process. Jay worked with Haas' Orville Collins to show the steps of...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas Product Guide - A Quick Tour of Our Entire Machine Lineup

    If you've ever been browsing the Haas website and wished you could get a quick summary of all the types of machines and all the available models within each series, then this video is for you. Take a quick trip through...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Apps Minute - Position Page

    Product Specialist Milton Ramirez walks us through the various ways we can use the POSITION page on the Haas control. Milton reviews the Program, Distance To Go, Machine, and Operator screens, talks about when to use...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas Apps Minute - Correctly Formatting G04

    G04 is the G-code you use to add a "pause" or a "dwell" in your program. It's a commonly used code but sometimes there is confusion about how the time periods specified by the command should be called out. This Apps...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Advanced Search - Haas Automation Tip of the Day

    In this Tip of the Day video, Mark gives us some quick tips on getting the most out of text searches on the control. Don’t miss any TIP-OF-THE-DAY videos. Click here...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas’ New High Performance 50-Taper Spindle - Haas Automation, Inc.

    Do you need to increase how much material you can cut per minute? Do you need to go even faster than our standard high precision robust 50-Taper spindle? If that’s the case, then you should check out our new 60HP...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Tapping Essentials - Every Machinist Needs to Watch This - Haas Automation Tip of the Day

    Have you ever grabbed a tap out of your toolbox and wondered if it was the right tool for the job? Or tapped a hole only to find out that the threads aren't deep enough? Or worse yet, broken a tap? Chances are, the...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas Apps Minute - Proper Indicator Setup, Eliminate Indicator Droop!

    Applications Engineer Paul Bailey gives us a quick tutorial on what indicator droop is and how to make sure it isn't affecting your measurements on Lathes and Horizontal Mills. Don’t miss any Haas videos. Click here...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Coolant The Movie - Haas Automation Inc.

    We've produced quite a number of coolant related videos over the years here at Haas. This 30-minute epic was produced several years ago, but was never published on YouTube because we chose to break the content up into...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas Apps Minute - Setting Two Vises Up for a Long Part

    Applications Engineer Paul Bailey gives us a quick run-through on how to set two vises parallel to each other to cut a long piece of material. Don’t miss any Haas videos. Click here http://ow.ly/s28l30mTiUo to join...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas Apps Minute - SFM & Chip Load Display

    On this installment of Haas Apps Minute, Mark Terryberry takes a close look at how you can ensure the SFM and Chipload readouts on your control screen are always displaying the correct values. It all comes down to...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Customer Spotlight - Auxein Medical - Haas Automation, Inc.

    In the 2nd video produced at our Haas Factory Outlet in Bhiwadi India, the HFO talked with the team at Auxein Medical, in Haryana India, looking at how they got started and where they are headed in the future. To find...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Festo Air Purge Solenoid Cleanout - Haas Automation Service

    Do you have issues with the Air Purge Solenoid on your Haas machine? If so, when you troubleshoot the solenoid you'll find one of three styles on recent machines. We've already made a video covering the SMC and ASCO...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas Apps Minute - Rotary Settings

    Orville shows us the quick way to enable a new rotary table, disable a disconnected rotary, or change the rotary configuration on the NGC control. Don’t miss any Haas videos. Click here http://ow.ly/s28l30mTiUo to...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas Apps Min - Quickly Calculate Feeds and Speeds

    If you've got a tap or end mill and need a quick starting point for "feeds and speeds" values, then this video is for you. The Haas control has features within the Calculator to help you quickly find these values...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Does Your Lathe Hydraulic Union Look Like It's Leaking? - Haas Automation Service

    If you see oil coming out of the hydraulic union on your Haas lathe, check out this quick video to see if you've got what might be a simple and easily fixed issue. If have questions regarding the steps outlined in this...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas Apps Minute - Haas Control Settings 130 & 133

    This Apps Minute is a little refresher on using Settings 130 and 133 in the Haas control. These two Settings control the Tap Retract Speed and Repeat Rigid Tap functions. As we mention in the video; Mark Terryberry has...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Customer Spotlight - Whitliejo Specialty Co. - Haas Automation, Inc.

    Shaun Hebert, the Manufacturing Manager at Whitliejo Specialty Company, talks about how competitive the business of machining is in Louisiana and how Haas machines have helped Whitliejo bring in new talent to keep pace...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas ST-10Y Finishing Spindle Cutting Demo - Haas Automation, Inc.

    Here is some more cutting footage from our ST-10Y compact turning center. This time we're concentrating on milling, drilling, and tapping on the sub-spindle or "finishing spindle", as we also call it. This A2-5, 6000...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    MACRO HACKS! Automate Your Tool Offsets and Data - Haas Automation Tip of the Day

    Mark gets back out into the deep water on this one. Check out how you can automate the proper entry of tool offsets and other important tool data using one of Mark's favorite macro variables; #3026. It's easy to...   
    Video ansehen >>

  • thumbnail

    content type : HAAS

    Haas ST-10Y and Parts Catcher Demo - Haas Automation, Inc.

    Check out Haas' ST-10Y compact turning center doing some Y-axis cutting, and using our productivity-boosting Parts Catcher option. Learn more...   
    Video ansehen >>










Zentrale

  • flag of be HAAS Automation Europe
  • Headquarters
  • Mercuriusstraat 28
  • B-1930 Zaventem
  • Tel. +32 2-52299-05
  • www.haascnc.com
Haas Automation ist der größte Werkzeugmaschinenhersteller in den USA. Das Unternehmen fertigt ein umfassendes Sortiment von CNC-gesteuerten, vertikalen und horizontalen Bearbeitungszentren, CNC-Drehmaschinen, 5C-Indexiertischen und Drehtischen....
mehr

Niederlassungen

  • flag of at HAAS Factory Outlet
  • A Division of WEMATECH
  • Prettachstrasse 6
  • A-8700 Leoben
  • Tel. +43 3842-25289-14
  • www.haascnc.com